Tuesday, February 7, 2012

Part 2 - The Moth Orchd Throat and Column

The Moth Orchid Continued

Making the Column 

  • Take a small ball of paste and roll into a tear drop
  • Insert a 22g wire into to pointy end
  • Mold to wire making a point. Not too big so it is a good size for the petals
  • Hallow out with a small rolling pin or similar, keeping the top smooth and round
  • Leave to dry
Wire inserted and hallowed out
Showing against rolling pin


Making the Throat


The throat is a bit trick and is best if you can look at a real flower or one on the internet before making this. You have to work fairly quickly before the past begins to dry, so cut out a couple of pieces in advance.
  • Not necessary to cut out shape further but you can 
  • Soften edges while thinning out rounded shape to elongate a bit. Hallow out lightly to curve a bit


soften edges while elongating
soften edges
  • Roll out 2 very thin pieces of paste about 1/2" long to attach
  • Attach one to each side with a small drop egg white and press to attach
  • Roll the tiny pieces back to curve around and just leave as they end up. 
  • They are very fragile so do not play with them too much

Adding the Anther Cap
  •  Roll a tiny ball of paste to fit into the bottom portion as you see in the second picture
  • With a sharp tool make a cut down the center and open up slightly.
  • Smooth edges with your fingers and point both sides slightly
  • Attach with a tiny drop of egg white





Shaping the Throat
  • Next you want to curve the entireThroat inward. The sides curve in and the tip curves up
  • Hold in your palm and gently curve pieces then lay them in the former to dry
  • Reshape if they fall a bit during drying





















2 comments:

  1. Very detailed tutorial! Thank you for sharing and inspiring us :-)
    Astri

    ReplyDelete
  2. Hi Astri.. glad you enjoyed it and it is useful. I plan to do a few more tutorials this year and other flower info that might be of interest..

    Shaile

    ReplyDelete